Side Table

What you need

 Tools  Materials
   

GST 18 Jigsaw

 Meranti 20mm

Router plus parallel guide

 Table top  460 x 460mm – 1 piece

PSR 18 Cordless drill

 Top sides 500 x 80mm – 4 pieces

Spray Gun

 Top sides 500 x 80mm – 2 pieces

PSR Select cordless screw driver

 Leg slats 30-40mm round wooden bar (curtain rod can work-can also be pine) 500mm long x 4 pieces.
 Drill press

Legs 700 x 150mm – 4 pieces

   4 x bolts (6-8mm) min 60mm long – 2 pieces 
   nuts to fit bolts – 4 pieces
   flat washers to fit bolts – 8 pieces
   8mm dowel stick – 1 piece
   varnish – Indonesian teak 1 ltr
   wood filler – dark
   wood glue
   4 x 40 screws

Steps to build the side table

  1. Cut table sides to size and router decorative groove
  2. Rout out same groove on top
  3. Assemble sides and top. Fill screw holes
  4. Draw out shape for legs and cut out for each leg.
  5. Sand all four legs together to ensure they are exactly the same
  6. Drill recess holes for cross slats
  7. Drill hole for bolts. (if I can figure out how to do it with dowels then we will show that rather)
  8. Sand and varnish (it’s easier to varnish them all separate and then assemble)
  9. Attach cross slats
  10. Attach legs to top

Printable Plan

Side table