What you wil need:
Tools |
Material List |
GST 18 Jigsaw |
Pine 20mm |
Router |
Top 500 mm x 470mm – 2 pieces |
PSR 18 Cordless drill |
Sides 900 x 370 mm – 2 pieces |
Spray Gun |
Top, bottom and middle 360 x 370 mm 9grain in direction of 360mm) – 3 pieces |
PSR 10.8 Screwdriver |
Shelf slats 70mm x 400mm – 3 pieces |
Drill press |
drawer sides 350 x 140 mm – 2 pieces |
Eccentric Sander |
drawer front and back 295 x 140mm – 2 pieces |
Electric tacker |
Drawer bottom 335 x 350mm – 1 piece |
|
Drawer front face 200 x 400 |
|
drawer runners – 300/350mm – 1 set (left and right) |
|
Varnish |
|
wheels 75mm – 4 of (with brake |
|
3mm ply/masonite – 400 x 900 mm |
Steps
- Attach two top pieces to each other and let dry.
- Build the frame – attach bottom top and sides
- Drill holes in middle shelf for hammers, screw drivers etc
- Fit middle shelf.
- Put in slats on bottom and middle shelf.
- Attach top rout edges
- Build the drawer – attach bottom sides, back and front.
- Fit runners to drawer and frame (NB only with 2 screws to line up)
- Attach front drawer face
- Cut out handle and router
- Remove runners
- Sand and varnish
- Fit wheels
- Re- attach runners with all screws and insert drawer