Show: Get It Done
Season 5 / Episode 2
Instructions
Tools
- Jig Saw
- PSR 14.4 Cordless Screw Driver
- PSR 10.8 Cordless Screw Driver
- PEX 220
- PFS Spray Gun
Material List
- Pine 38mm
- 1600 x 600 – 1 piece not warped!! (If you can’t get 38/40mm then get two pieces of 20mm and laminate it together)
- 114mm x 38mm
- 900mm x 4 pieces
- 1200mm x 8 pieces
- 448 mm x 9 pieces
- Pine 20mm
- 1200mm x 525mm x 2 pieces
- 1600mm x 200mm x 1 piece
- 38 x 38mm cleats x 1200mm – 4 pieces
- 4 x 70mm screws
- 4 x 40mm chipboard screws
- Wood glue
- Water based varnish – 1 litre
Steps
- Laminate two top boards and let dry.
- Build three frames for top middle and bottom.
- Join legs onto frames.
- Join top onto frame.
- Router top.
- Sand and varnish.