On Air 05:00 - Homemark
Next 08:00 - Design for you
Make a Work Bench

Show: Get It Done
Season 5 / Episode 2

Instructions

Tools

  • Jig Saw
  • PSR 14.4 Cordless Screw Driver
  • PSR 10.8 Cordless Screw Driver
  • PEX 220
  • PFS Spray Gun

 


Material List

  • Pine 38mm
  • 1600 x 600 – 1 piece not warped!! (If you can’t get 38/40mm then get two pieces of 20mm and laminate it together)
  • 114mm x 38mm
  • 900mm x 4 pieces
  • 1200mm x 8 pieces
  • 448 mm x 9 pieces
  • Pine 20mm
  • 1200mm x 525mm x 2 pieces
  • 1600mm x 200mm x 1 piece
  • 38 x 38mm cleats x 1200mm – 4 pieces
  • 4 x 70mm screws
  • 4 x 40mm chipboard screws
  • Wood glue
  • Water based varnish – 1 litre


Steps

  1. Laminate two top boards and let dry.
  2. Build three frames for top middle and bottom.
  3. Join legs onto frames.
  4. Join top onto frame.
  5. Router top.
  6. Sand and varnish.