This is what you’ll need
| Material List: | Tools: |
| Meranti or Saligna 20mm (No Pine – the heat of the fire will buckle it) | Cordless drill drivers |
| Leg fronts – 150mm x 1150mm – 2 pieces | IXO with angle head |
| Leg sides – 80 mm x 1150 mm – 4 pieces | Router |
| Skirt front – 150mm x 1040 mm – 1 piece | PSM Sander |
| Skirt sides 150mm x 80 mm – 2 pieces | Eccentric Sander |
| Top 1 – 1080 mm x 140mm – 1 piece | Angle Grinder with multi construction discs (skinny ones) |
| Top 2 – 1120 mm x 160mm – 1 piece | |
| Top 3 – 1160 mm x 180mm – 1 piece | |
| 70mm x 700 mm – 1 piece | |
| 110 mm x 110 mm – 2 piece | |
| 100 mm x 150mm – 2 pieces | |
| 190 mm x 150mm – 2 pieces | |
| 20 x 20mm cleats 1000mm – 8 pieces (can also be pine) | |
| wood Glue | |
| 4 x 40mm screws | |
| Wood filler to match wood | |
| Teak oil |
Fire Place Mantle.
Legs (hollow type – gives impression its bigger)
– mark, measure and drill Pilot holes on cleats.
– join front to sides with cleats
– attach feet/skirt
– router design on legs
Top – skirt
– mark, measure and drill Pilot holes on cleats.
– router decor parts
– attach decor parts to the front of skirt
– attach “sides” (top and bottom)
Top – tiered
– Mark and drill where three tops join together
– router all three tops
– Join together
– Attach tops to skirt
Assemble legs to the skirt and top.
Sand and oil with teak Oil.
PLANS
[1]