Kiddies Swing
What you will need
Tools |
Materials |
Cordless Drill Driver |
Material 18mm Ply wood |
PSR Select screw driver |
Sides – 400 x 200 mm – 2 pieces |
Jig Saw |
Back – 450 x 300 mm – 1 piece |
PEX 220 Sander |
Base – 450 x 370mm – 1 piece |
PSM 18 VLI sander |
Arm rest 400 x 70mm – 2 pieces |
Spray gun |
Base supports – 600 x 100 – 2 pieces |
Angle Grinder with multi construction disc (thin one) |
Chain – 1000mm x 2 (must be thick enough to hold swing and child) |
Router |
I bolt to fit chain – 4 of with nuts |
Step by Step
- Cut out hearts in sides
- Cut out shape on the back
- Mark and drill pilot holes
- Router edges
- Attach sides to the base
- Attach back into sides and base
- Drill and mark off holes in arm rests and slats under seat.
- Attach slats under seat and arm rests to sides
- Sand, stain and varnish
- Attach eye bolts, chain and D shackles.
- Hang swing with rope in tree.