On Air 15:00 - Finest Homes
Next 15:30 - Home of the Year

Dining Room Table

You will need

Tools Materials
PSR 18 Drill driver (new)   Top 18mm ply wood 1200mm x 1200mm – 1 piece 
PST 18 Jig Saw Pine 20mm (Planed all round) NB must be straight and not be warped.
PSR 10.8 New   Top – 1200 x 200mm – 2 pieces
Router Top – 800 x 200mm – 4 pieces (I will cut 1 piece to 300 x 200 mm x 2 pieces)
Glue gun (NB make sure you have 7mm glue sticks) Legs – 120mm x 740mm – 8 pieces
  Legs – 90mm x 740mm – 8 pieces
  Base 160 x 160mm – 4 pieces
  Skirt – 860 mm x 100mm – 4 pieces
  20 x 20mm cleats 
  wall paper squares 300 x 300 for décor inside the glass squares. Any “nice” paper will work. 
glass 3-4mm. 312 x 312mm – 5 pieces  
  clear silicone – 1 tube
  wood glue
  4 x 40mm screws
  contact adhesive – 1 big tube
  Water based varnish – dark oak or similar colour
   

Steps

  1. Legs

– join four sides to make a “thicker” type leg

– fill holes and let dry

– sand once dry

– fit feet/bases to bottom of the legs (rout before fitting)

  1. Table
  • Rout insert slats
  • Mark off on ply wood slab where slats fit and drill pilot holes
  • Mark off where skirt and legs fit underneath
  • Attach skirt and legs
  • Attach insert slats to slab
  • Sand and varnish
  1. Glue wall paper into the squares on the table
  2. Spray pattern onto glass
  3. Glue glass and seal into table top

Plan

Printable dining room table plan