On Air 16:00 - Bryan Inc
Next 17:00 - Grand Design Australia

Spice rack and Tablet holder

Bosch Logo - Invented for life Res Eureka-fasten-and-fix-it-logo

 Get it Done team pair up to build a circular spice holder and a cookbook/tablet holder to make cooking a little easier. 

You will need:

Tools Materials
JigSaw 20 mm Pine or meranti Not same wood as previous (something a bit more exotic would be nicer) NB cannot be warped – if warped we cannot use it
Router  Tablet Back panel 400 x 300 mm – 1 piece (Grain in long direction)
PEX 300 sander (New one)  
PSR 18 cordless drill driver Spice rack bottom and top 300 x 300mm – 2 pieces
PSR 1080 Cordless drill driver (New one) 20 mm dowel stick/broom stick – 250mm – 1 piece
PFS Spray gun wood glue
PSR Select screw driver 4 x 30mm screws
PSM Sander 4 x 25mm screws
PTD 40 drill press clear varnish (waterbased) We can also use stain it a colour and then vatnish
50mm hole saw  

Steps for both

Spice Rack

  1. Draw out outer circle and also mark out inner circle for bottles x 2
  2. Cut out outer circles with a router
  3. Drill out holes for bottles in top slat
  4. Recess holes in bottom shelf
  5. Router all edges
  6. Drill hole in base and top shelf for dowel/broom stick
  7. Cut broom stick to size
  8. Assemble
  9. Attach handle top the top and feet underneath (we will use the circles cut from the holes for spice bottles)
  10. Sand and varnish

Tablet/recipe book holder (This all gets cut from 1 piece of wood)

  1. Cut back rest out
  2. Holder is narrow so we rout first then cut it out
  3. Cut shape for back board
  4. Router edges
  5. Assemble
  6. Sand and varnish

Plans for both