What you will need:
|router (or trio)||Melamine 16mm (white with 3mm impact black edging)|
|18 volt Cordless Drill driver||top and bottom – 648 mm x 350 mm – 2 pieces. edged 1 long and two short sides|
|PSR select cordless screwdriver||Sides – 848 mm x 350 mm – 2 pieces. edged 1 long side|
|jigsaw||shelves – 616 mm x 350mm – 3 pieces. Edged 1 long side|
|backing board 3 mm white coated masonite. 648 x 880 mm – 1 piece|
|PSM 18 sander||drawer front and back – 302 mm x 195mm – 4 pieces. Edged 1 long side with white thin edging|
|drawer sides – 318mm x 195mm – 2 pieces. Edged 1 long side with white thin edging|
|drawer bottom – masonite 3mm – 334 mm x 302mm – 1 piece|
|drawer doors – 302 mm x 198mm – 2 pieces edged all sides|
|Door knobs/handles x 2|
|Perspex 5 mm white (clear can also work) 350mm x 206mm – 4 pieces|
|3.5 x 40mm chipboard screws (eureka to supply)|
|plastic corner brackets – dbl type (four holes) x 1 bag|
|screw cap covers white.|
|6 door stops for feet|
|1 piece of meranti 120mm x 50mm – 16mm thick. NB not laminated.|
Steps to build the Shoe cabinet
- mark out and drill pilot holes where shelves fit on the sides.
- mark out and drill where sides fit to the top and bottom.
- router groove in shelves for perspex.
- add on door stops for feet
- attach backing
- slide in perspex.
- cover screws
- Make drawers
- attach sides and front
- attach bottom
- fit door knobs/handles to the front panel
- attach front panel to drawers
- insert into shoe rack.
Download and Print the plan
This week’s Bosch Tool Tip