What you will need:
Tools | Material list |
GST 18 Jig saw | 20mm pine PAR |
18 volt Cordless Drill driver | Pine 38 x 114 x 2400 – 5 pieces |
PSR 10.8 | Pine 38 x 114 x 3900 – 1 piece |
spray gun | Uprights – 75 x 75 x 2800 – 3 pieces |
Pex 220 sander | Shade net – 4.1mtr x 2.4mtr – 1 piece |
PBH rotary hammer (drill bit size same as wall anchor) | pine 38 x 38mm x 4.0mtr – 2 pieces |
PCL 20 plus pole | pine 38 x 38mm x 2mtrmtr – 1 pieces |
Small angle grinder plus skinny disc | Corner brackets (75 – 100mm) – 20 pieces |
Ply wood 18mm – 700 x 1400 – 2 pieces | |
Pine 20mm – 114 x 700 mm – 4 pieces | |
wall anchors – 12 pieces | |
4 x 40mm screws | |
4 x 60mm screws | |
Tec screws plus roof washers | |
wood glue ( waterproof) | |
Varnish |
Steps for building a Pergola
- First we cut out the shape on the roof slats.
- Then we cut hoople iron to size and drill holes
- Fit upright poles
- Attach cross slat on top of upright poles
- Fit roof slats above the cross slat and back board
- Varnish
- While varnish is drying make a new top for Mathews table and varnish this.
- Fit shade net to pergol
Download and Print the plan
Plan for building a Pergola [1]
This week’s Bosch Tool Tip