What you will need:
Tools | Material list |
GST 18 vli plus pls 300 guide | Meranti 20mm thick. PAR |
18 volt Cordless Drill driver | Frame – 50 mm x 1200mm – 4 pieces |
PSR 3.6 screw driver | frame slats – 40 mm x 460 mm – 8 pieces |
Multi Tool with sanding atachmnet | Shelf slats – 50 mm x 150mm – 93 pieces (can also use 9 x 1.8mtre legths – I will cut to size) |
Pex 220 sander | Shelf small slats – 20mm x 20mm x 460mm – 24 pieces |
Plumbing tools (I will bring) | 6mm bolts with nuts x 2 pieces (eureka) |
Router | 6mm washers x 6 pieces (eureka) |
dremel tool | 4 x 40mm screws (eureka) |
Wood stain – (cedar Paint – we can do like we did with the swing) | |
wood varnish clear | |
tap washer (NB let BG check size) | |
10-15mm rope – 2mtrs (prefer hesian type rope) |
Steps for Herb Garden
- Mark and drill pilot holes on the frame.
- Cut angles on leg side and round part on top side of frame.
- router edges of frame.
- fit slats and assemble frame.
- cut out points on the shelf slats
- Join shelf slats to small horizontal slats
- insert and attach bottom slats.
- attach slats to frame.
- cut and assemble back frame
- attach back frame to the front frame.
- stain
- carve out herb names with dremel tool 13. varnish 14. attach rope 15. put in Herbs
Download and Print the plan
This week’s Bosch Tool Tip