What you will need:
Tools | Material list |
GST 18 vli plus pls 300 guide | Timber 40mm (meranti would look nice) |
18 volt Cordless Drill driver | 480mm x 180mm – 2 pieces |
PSR 10.8 | 200 mm x 180mm – 2 pieces |
spray gun | 3 x wine bottles |
Pex 220 sander | 4 x 60mm screws |
PSM 18 volt sander | clear varnish (we could also oil it) |
Router | 10mm dowel stick (NB to match same type of timber as above) |
PBD 40 drill press | |
Hole saw (same size as wine bottles) | |
Glass cutter (normal type) | |
Dremel 8200 cordless plus diamond wheel accessory) | |
Steps For the Bottle Vases.
- Mark out where the sides join to the top and bottom
- Mark out and drill holes for the bottles
- Assemble
- Plug holes with dowels
- Router
- Sand and oil/varnish
- Make jig for bottles
- Cut bottle tops off
- Insert into stand.
Download and Print the plan
This week’s Bosch Tool Tip