Bottle Vases

What you will need:

Tools Material list
GST 18 vli plus pls 300 guide Timber 40mm (meranti would look nice)
18 volt Cordless Drill driver  480mm x 180mm – 2 pieces
PSR 10.8 200 mm x 180mm – 2 pieces
spray gun 3 x wine bottles
Pex 220 sander 4 x 60mm screws
PSM 18 volt sander clear varnish (we could also oil it)
Router 10mm dowel stick (NB to match same type of timber as above)
PBD 40 drill press  
Hole saw (same size as wine bottles)  
Glass cutter (normal type)  
Dremel 8200 cordless plus diamond wheel accessory)  
   
   

Steps For the Bottle Vases.

  1. Mark out where the sides join to the top and bottom
  2. Mark out and drill holes for the bottles
  3. Assemble
  4. Plug holes with dowels
  5. Router
  6. Sand and oil/varnish
  7. Make jig for bottles
  8. Cut bottle tops off
  9. Insert into stand.

Download and Print the plan

 Bottle Vases plan

This week’s Bosch Tool Tip