Bird Feeder
Material List:
Material list |
Power tools |
20mm ply wood |
Cordless drill drivers (18 & 14.4 volt) |
400 mm x 400 mm – 3 pieces |
PST 18 volt jig saw |
40mm x 400 mm – 2 |
PSR 10.8 volt cordless drill driver |
40 mm x 360mm – 2 pieces |
PEX 220 sander |
200mm x 400mm – 2 pieces |
PLS 300 jig saw guide |
30mm round bar |
PFS spray gun |
50mm x 200 mm – 2 only if mounting on pole) |
|
50 mm x 70mm x 1200mm |
|
114mm x 38mm – 400mm – 4 pieces |
|
30mm x 20mm x 1000mm – 4 pieces |
|
4 x 40 mm screws |
|
Linseed oil 1 ltr (or 750mm) |
|
water resistant glue |
|
Thinners 1 ltr (or 750mm) |
|
Instructions
- Mark and drill out pilot holes for base
- Assemble base
- Cut out sides and drill holes
- Cut perch to size
- Attach sides and perch to base
- Attach roof
- oil
Stand/pole
- Cut pole to size
- Cut legs to 45deg
- Attach legs to pole
- Cut and attach support/brace to legs
- oils
- Attach bird feeder to pole