Material List:
Material list |
Power tools |
Supa wood 16 mm |
PST 18 Cordless jig saw |
1666 mm x 570mm – 2 pieces |
PSR 18 VLI Cordless drill driver |
White melamine 16mm |
PSR 10.8 volt cordless drill driver |
547mm x 740mm – 2 pieces (edging on 1 long side) |
Pex 220 sander |
547mm x 434mm – 3 pieces (edging on 1 short side) |
PWS angle grinder with diamond disc for tiles |
100mm x 466mm – 2 piece (no edging) |
Router (maybe we can decide on the day) |
100mm x 514mm – 2 pieces (no edging) |
Big sponge for grouting |
100mm x 434mm – 2 pieces (edging on 1 long side) |
Paint brush (100mm) |
3mm white masonite 466mm x 534mm – 1 piece (no edging) |
Grout spreading tool (rubber strip on handle) |
4 x 40 mm chipboard screws |
|
Flex ready mixed tile glue. 2 lt bucket |
|
Mid brown grout 2 kg |
|
11 mosaic tile squares |
|
roof water proofing sealer – 1 ltr |
|
Water resistant wood glue |
|
Bathroom basin |
|
Taps |
Steps for vanity
Top
- Join two pieces together to make one thick top.
- Cut out for basin
- Paint with water proofing and leave to dry.
To continue once dry…….
Shelves
- Mark out where bottom, middle and top shelves fit.
- Drill pilot holes
- Join sides onto shelves
- Fit backing board
- Assemble foot piece and attach to cupboard.
- Attaché shelves to main vanity cupboard
Back to top
- Cut tiles to fit top
- Apply glue to tiles and stick.
- Grout all tiles
- Attach top to vanity cupboard
Place basin on top and connect taps once installed.