Outdoor Table and Dice Storage Box
This week Peter and Annalien build a storage box that acts as a seat and looks like a dice. They also build a table that is held up by pot plants. Peter makes a vase out of an old light bulb as well as some wind chimes from copper pipes. Be inspired to make your own!
You will need:
| Tools | Materials |
| POF 1400 Router | meranti 20mm |
| PST 18 Jigsaw | Table sides and top 120mm x 1500mm – 8 pieces |
| PCM Compound Mitre Saw | Ply wood 18/20mm |
| PSR 10.8 Cordless drill Driver | Chair top and bottm 450 x 450mm – 2 pieces |
| PSR 18 Cordless Drill Driver | Chair sides 400 x 364mm – 2 pieces |
| PEX 220 Eccentric/Random Orbital sander | Chair sides 400 x 400mm – 2 pieces |
| glue gun | Ply wood 6mm |
| dice inserts 340 x 340mm | |
| 3mm plywood (white backing for dice dots) +/- 1000 mtr square | |
| Woodoc ebony stain – 1 bottle | |
| Clear varnish water based – 1.5 ltr | |
| wood glue | |
| 4 x 40mm screws | |
| 4 (or 3) x 20mm scews | |
| two 40cm diametr ceramic pots (must not be higher than 500mm (coffee table height) | |
| two pot plants to fit pots | |
|
door stops for feet – 4 pieces |
Follow these steps:
Dice seat Steps
- Measure and cut sides
- Router inside edges
- Put in inserts
- Assemble sides to form a square
- Attach top and bottom to the square
- Stain with Ebony stain
- Drill out circles on masonite
- Glue onto dice
- Spray clear coat
- Attach door stops for feet
Plant Table Steps
- Assemble sides
- Attach support slats
- Fit top slats
- Cut out shape for pots
- Router edges
- Sand and varnish
Download the plans/layouts:
Take a closer look:
Final Tiles Gallery id=8 does not exist
