You will need
Tools | Materials |
PSR 18 Drill driver (new) | Top 18mm ply wood 1200mm x 1200mm – 1 piece |
PST 18 Jig Saw | Pine 20mm (Planed all round) NB must be straight and not be warped. |
PSR 10.8 New | Top – 1200 x 200mm – 2 pieces |
Router | Top – 800 x 200mm – 4 pieces (I will cut 1 piece to 300 x 200 mm x 2 pieces) |
Glue gun (NB make sure you have 7mm glue sticks) | Legs – 120mm x 740mm – 8 pieces |
Legs – 90mm x 740mm – 8 pieces | |
Base 160 x 160mm – 4 pieces | |
Skirt – 860 mm x 100mm – 4 pieces | |
20 x 20mm cleats | |
wall paper squares 300 x 300 for décor inside the glass squares. Any “nice” paper will work. | |
. | glass 3-4mm. 312 x 312mm – 5 pieces |
clear silicone – 1 tube | |
wood glue | |
4 x 40mm screws | |
contact adhesive – 1 big tube | |
Water based varnish – dark oak or similar colour | |
Steps
- Legs
– join four sides to make a “thicker” type leg
– fill holes and let dry
– sand once dry
– fit feet/bases to bottom of the legs (rout before fitting)
- Table
- Rout insert slats
- Mark off on ply wood slab where slats fit and drill pilot holes
- Mark off where skirt and legs fit underneath
- Attach skirt and legs
- Attach insert slats to slab
- Sand and varnish
- Glue wall paper into the squares on the table
- Spray pattern onto glass
- Glue glass and seal into table top
Plan
Printable dining room table plan [1]