Material List:
Material list |
Power tools |
20mm pine (planed all round) |
PST 18 Cordless jig saw |
400 mm x 200 mm – 8 pieces |
PSR 18 VLI Cordless drill driver |
360 mm x 200 mm – 8 pieces |
PSR 10.8 volt cordless drill driver |
20mm x 20mm x 1500 cleats – 4 |
Pex 220 sander |
20mm meranti (planed all round) |
Router (we can decide Dremel or Bosch) |
360mm x 90mm – 16 pieces |
PFS spray gun |
50 mm x 60mm x 400 mm pine (70 x 50 can also work) – 8 pieces |
|
4 x 40 mm screws |
|
4 x 30 mm screws |
|
wood glue |
|
water based clear varnish x 2 ltr |
|
wood filler pine and meranti (get new fresh ones) |
|
Here are the steps
- Make the frame.
- Draw out and drill pilot holes where the four sides join together.
- Attach four sides together
- Attach cleats to inside of frame
- Attach top to the cleats inside frame.
- Repeat for other three cubes
- Attach all four cubes together
- Attach legs to the four corners
- Fill holes, sand and varnish